The issue with other fire suppression systems can be the need for human awareness. They require you to push a button, to know that something is on fire. Sometimes these systems require connections, batteries, and maintenance that defeats the point of having something that you can be sure will keep you safe regardless of your awareness.
The PROTENG UTV Automatic Fire Suppression HD system is a flexible tube that wraps around your engine, giving your 360 degrees of protection from flames anywhere in the engine compartment of your vehicle. This tube is full of FM-200 gas that when heated enough will combust and deploy 3-4 feet in all directions, both suppressing flames and giving your time to safely exit your vehicle without fear of harm. The pressure of the gas deploying creates a loud audible puff that lets you know something has set off the gas and alerts you to the need to leave your vehicle.
Best of all this FM-200 gas is non-corrosive, non-residue leaving, and environmentally clean. It’s gas that is used in inhalers used around the world every day. You don’t have to worry about the system to you have to save your life, ruining your engine in the process. Instead, you can rest easy knowing that you and your family and friends are safe, and your vehicle can be repaired without fear of the gas destroying it fully.
In the product information on this product, we have an installation guide and a how-to video that will show you how to install this floating system easily with all the needed items enclosed in the packaging of the system.
No longer will there be a need to hope that, in the event of some fire causing emergency, you notice flames from the corner of your eye, or catch the smell of burning early enough to get out of your vehicle.
Lots of the time when we talk about UTV’s/Side by Sides the first thing that people want to do is get out there and having a good time, but what you need to think about— probably much closer to the purchase of your vehicle then you want to, is what parts the manufacturer is putting into them.
It’s not surprising, when you think about it, that a manufacturer is going to use lower-cost, very flexible parts. This keeps the initial cost of your vehicle down, and it’ll get you out in your new toy right off the bat. You may not notice many issues at first, but the reality is, it won’t take long before you start to notice that at higher speeds your vehicle is vibrating more than it should.
Your manufacturer utv carrier bearing isn’t made up of nearly enough stabilizing solid material. Instead, you get a very large rubber bushing, and inside of that rubber bushing is the metal bearing. They build it like this for a reason. Manufacturers want there to be tolerance and an allowable amount of movement, but that soon can become way, way too much movement for your vehicle.
It isn’t holding your driveline snug enough. Just like the rest of us, your driveline wants to be held— but in all seriousness, in order for the driveline to be in phase it needs to be held at just the right angle to keep it balanced.
Your driveline is being beaten up, and it isn’t strong enough to take it. Just like your carrier bearings, your driveline isn’t built with the most love and care in the world. It isn’t perfectly balanced, it isn’t being held at the correct angle, and the U-Joints aren’t automotive U-joints. So what you get from the manufacturer is only meant to go up to 45 mph or around 2k RPMS constantly. So when time wears down the rubber in your carrier bearing and you are going faster, your driveline can bend and twist.
Let’s Talk About Vibration Or How Important Your Utv Carrier Bearings Are.
First, you take care of your stock carrier bearing as long as possible. Mud and debris get into the rubber bushing pretty easily. Greasing it every other time you go out will help keep it around longer, but you can’t fight the inevitable. Eventually, there will be too much play and you will notice that your vehicle is making a lot of noise and vibrating more than it should be.
You upgrade. It’s important for the longevity of your vehicle, and for your own continued safety. No one wants a driveline vibrating out of control between their legs when they are out trying to have fun!
When it comes time for you to upgrade we recommend Sandcraft RCR Motorsports, and here’s why:
Sandcraft RCR uses a self-aligning technology in their carrier bearings. That allows the bearing to stay snuggly and securely around your driveline. It also corrects that angle that we mentioned above.
The simple act of controlling the angle allows the driveline to remain in phase, or balanced, all the way from front to back. Staying in phase keeps your driveline more balanced and prevents twisting and bending.
Sandcraft RCR owns their own patent and design. This means that they have created this third-generation carrier bearing with all of the safety and longevity that you will want, in mind. They stand behind their name and they own their product. They have put in the time and energy to test and create an amazing product.
You can get your UTV carrier bearings and driveline in one easy kit. I know, I know, you just started thinking about the carrier bearing and now we are throwing the driveline in! It’s important though, with just the carrier bearings you still have a driveline with U-Joints that are only rated for 2000 driveline RPM.
That means that once you go faster than 45 mph, you are exceeding the part’s capabilities. So if you were to only upgrade your carrier bearing you will still see some vibration and there is still the risk of bending your driveline.
ATV partsLet me tell you a little about this driveline, too. The U-Joints in these drivelines are 3 times stronger than your manufacturers, that means that they are rated for 6000 driveline RPM (For you speed junkies, that means going 120 miles an hour before you will see any kind of failure).
They are balanced accurately and remain in phase to keep vibration way, way down.
It is important to be able to know that your vehicle is going to be safe when you get out there and start having fun. Without the proper parts you have more and more chances of that going awry.
The carrier bearing for your UTV (Side by Side) is the mid way point of your drive shaft support system. It balances and supports the end of the rear drive shaft while spinning during driving.
The prop shaft also known as the front drive shaft is the smaller section of drive shaft that connects the rear drive shaft to the front differential for four wheel drive.
The drive shaft rear connects from the transfer case to the front prop shaft/Drive shaft front. The carrier bearing supports the end of this shaft where it meets the front drive shaft.
The carrier bearing supports both drive shafts as they travel from the rear of the side by side (UTV) to the front differential. The carrier bearing also provides stability to the drive shaft while spinning. If not taking care of the drive shafts just bounce around and cause damage to the differential, u joints and transfer case.
Since we launched American Off-Roads we have consistently used the word platform to describe what a lot of people might, incorrectly, call our website. In this blog post and video, we hope to clarify and layout for you exactly why we aren’t just a website.
The simplest way to describe the difference between these two ideas is to think of it this way, if a website is a house, a platform is the house, the foundation, and even the land that the house is built on. Not every house-type structure has a foundation (think of tents, mobile homes, RV’s) but every foundation has a house.
But for those of you that like your answer a little more technical, a website is a series of simple code that moves between static pages. A platform is a framework that encompasses a website but includes many additional services and features. Our platform, for example, includes five cloud platforms that allow us to evolve in massive ways over time.
Not only does this give up the power to include exciting and innovative features on our pages, in ways that just haven’t been done before in the off road market, but our platform allows us to keep a very unique amount of transparency in all aspects of our business.
How often do you place an order on a website only to wonder how much your shipping will end up being before you get to the last step of checking out? Then after that, you have to wait to find out exactly how long your product will take to get to you? But lo and behold, now that you have placed your order, you find out this product is back-ordered and coming from the other end of the world!
Our product pages are full of information about how and when you will be able to get your product with different shipping options clearing labeled. You will know, before you add a product to your cart, if you should expect a discounted shipping rate, flat rate or free shipping. Not only that but once you have purchased your product our platform interfaces with our vendors to decide if our warehouse is the best option to get your order quickly, or if one of our vendors can make it happen faster. Once that is established and a shipping label is made, that is sent right to your email.
One of the best things about having a platform of this kind is that we aren’t limited by media size and usage. On our product pages, you will notice several tabs to get you information, and some products even have videos from the vendor (or us, we like making product videos!). We have the ability to house that kind of media and we are including more and more videos every day.
After all of that, we still have the room on product pages to host product documents, installation guides, Q&A’s, and reviews!
Combining the ordering platform with IBM Watson also known to you as Buck allows us to expand the capabilities of customer service, search and platform navigation. Over time you will see the platform expand its ability to deliver information to you in a fast and efficient way.